UltraSoft® 9.0 oz Insulated Bomber

This flame-resistant Insulated Bomber Jacket was created to protect its wearer from the natural elements and any potential hazards on the job.

Designed with workplace safety in mind, this flame-resistant jacket will not only keep you warm in cold weather, its got safety protection covered with Hazard Risk Category 4 protection and high visibility 2-inch silver reflective trim on the front and back.

A no melt, no drip hook-and-loop closure down the front and on the collar and inherently flame-resistant fabric are just some features of this protective garment, specifically with thermal exposure and electric arc in mind.

Make safety protection simple with this Insulated Bomber Jacket; you can focus on the job at hand with confidence your protective garment has got your back.

Colour

This Insulated Bomber Jacket is available in the colour: Royal Blue

Features

• Trim featuring 3M™ Scotchlite™ Reflective Material
• No-melt, no-drip hook-and-loop closure down the front and at the neck 
• Lowered X reflective striping allows room for a company logo or crest to be added or a hooded undergarment to be worn without compromising high-visibility 
• Knit Cuffs
• Fleece Lined Side Pockets to warm your hands
• Covered snaps for hood addition
• Action back and side elastic

Fabric

Shell

• 9.0 oz. flame-resistant fabric
• 88% cotton, 12% high tenacity nylon from Westex®
• engineered for flame resistance and guaranteed for the life of the garment

Insulation Package

• 12.0 oz. wind and vapour barrier
• 88% cotton, 12% high tenacity nylon lining with modacrylic insulation

Closure

No melt, no drip hook-and-loop closure

• adjustable and secure closure, so your upper body is fully protected from any potential hazards

Design

Deep pleated action back

• pleats on the back of the insulated bomber provide enhanced mobility for natural and unrestricted movement on the job

Elastic waist inserts

• provides the garment with movement and flexibility for optimal comfort

Storage

Two chest patch pockets

• hook-and-loop closure on flaps for secure storage
• left pocket features a strap and elastic fasteners (ex. H2S monitor and other accessories can be attached here)

Two lower patch pockets

• feature snap closure flaps for secure storage

Size and Fit

Designed to be worn over clothes

Protection

Arc Rating ATPV 40.6 calories/cm2

Hazard Risk Category 4

Complies with the following safety standards and regulations:

• NFPA 2112: Standard on Flame-Resistant Clothing for Protection of Industrial Personnel Against Short-Duration Thermal Exposures from Fire
• NFPA 70E: Standard for Electrical Safety in the Workplace
• NFPA 1977: Standard on Protective Clothing and Equipment for Wildland Firefighting and Urban Interface Fire Fighting
• CGSB 155.20: Workwear for Protection against hydrocarbon flash fire and optionally steam and hot fluids
• CGSB 155.22: Fireline workwear for wildland firefighters
• ASTM F1506: Standard Performance Specification for Flame Resistant and Electric Arc-Rated Protective Clothing Worn by Workers Exposed to Flames and Electric Arcs
• CSA Z462: Workplace electrical safety

Applications

Includes but is not limited to industries such as petrochemicals, utilities, military applications, auto-racing, volunteer and professional firefighters

Download Spec Sheet Detailed Drawing

SIZING CONVERSION CHART

* take measurements wearing the same undergarments you intend to wear with this garment, and take the fullest part of you body (be it the chest, stomach, or hips) into account for the most accurate measurement

 * Please note the weight row is provided as a best guess option and should only be used when this is the only measurement provided.

How to Take Measurements for a Perfect Fit

For most of these measurements, you will require someone to help measure and read the measurements. Remember, you will be (or should be!) wearing other garments under this jacket, so take this into account when measuring for the best fit.

Remember to ask someone you are comfortable with and to respect everyone’s comfort levels. It is beneficial to discuss the measurement process briefly beforehand to ensure everyone is comfortable and you are able to get an accurate measurement.

Chest: 

• Stand in a straight, natural position
• Lift your arms up, parallel to the ground
• Using a tape measure, wrap the tape around the fullest part of the chest
• Then, drop your arm down naturally to your waist and take the measurement from the side

Sleeves:

• Hold arms parallel to the floor
• Bend your arm slightly into the chest, towards the collarbone, to test range of motion
• Start the tape measure at the base of the neck, then measure across to the shoulder
• Continue the tape measure down to the elbow, then down to the wristbone
• Measurement should end where you want the garment to sit at the cuffs, ensure your arms will be fully covered and protected while endings before extra fabric becomes a nuisance or hazard

Please phone customer service at 1-888-440-4668 if you require assistance.